Description

The CMDFlash tool may be a reader/programmer supporting BDM, EOBD K-LINE, EOBD CAN-BUS, EOBD PWM for all the new generation ECUs. With BDM you would like to unplug the ECU from the vehicle, open and connect it to our tool employing a connector available on every Bosch EDC16, Marelli, Siemens and Delphi ECUs.

This tool are often sold as a plug-in of our Map3d software or stand-alone tool.
The Software allows you to read/write the Eprom (29bl802 / M58), the interior firmware and therefore the serial e2prom containing the car’s codes. Checksum correction algoritm is automatic for all the ECU families, this mean you do not need to care about checksums calculations.

With this tool it’s possible to read all the ecu’s eprom, and after a nasty map tuning, a system hung or an interrupted write operation it’s always possible to restart the program operation to revive the ECU and begin the car. All the ECU data are often stored during a file with additional information like brand, model, plague, chassis number, data, note, customer etc. With search facilities and knowledge directly integrated in Microsoft Windows Explorer.