Using the new BENCH and BOOT protocols by KESS3 Work on the available ECUs with just one tool, satisfying your customer’s needs. Work in full …

Read and write via OBD the Bosch ME(G)17.9.1x, Bosch ME(G)17.9.21 and Bosch ME(D)(G)17.9.8 control units equipped on thousands of Hyundai and Kia vehicles Take action …

Works on Arbos 5100 and Landini REX3 equipped with Denso MB275700-2753 control unit. With this new protocol dedicated to the agri-world, you can work in …

Kia/Hyundai Continental SIM2K solutions via OBD Full and Bench Flex 6.25.0.0 out now The new solutions for programming in OBD Full and Bench modes have …

Read and write via OBD Transtron L4KX ECUs installed on the latest Isuzu D-Max and MU-X Work with maximum speed and efficiency for the complete …

Alientech news update: Upgrade 1.46 Work thanks to KESS3 on the Delphi DCM7.1AP control units that equip the latest vehicles Kia, Hyundai, Mahindra, Dongfeng, Force …

Magic Motorsport news update: Flex 6.24.0.0 New solutions for Bosch MEDC17 2021 Flex version 6.24.0.0 out now New solutions have been released for Bench programming …

TCU Bosch DQ500 MQB: Remap the new supported control unit for automatic transmissions of the VAG group via OBD Increase the performance and driving pleasure …

Alientech news update: Upgrade 1.44 Intervene now on the DCUs that equip some Ford brand models Work to tune and repair on the Bosch DCU17PC43 …

Magic Motorsport news update: Flex 6.23.0.0 A Flex exclusive: solution for Citroën Ami Flex’s vehicles list adds today the electric city car Citroën Ami. It is …

Remap with KESS3 Toyota Yaris GR equipped with Denso R7F701216 ECU Thanks to the latest KESS3 upgrade, you can work in BENCH mode on this …

Flex Exclusive: Boot solution for Delphi DCM6.2V Version 6.22.0.0 out now Bootloader mode for programming Delphi DCM6.2V engine ECUs installed on VAG group cars is now available: a new exclusive …

Remap in BENCH mode some Mahindra models with Bosch EDC17C61 control unit A new protocol for KESS3 allows you to work with total reliability on …

Flex exclusive: Full OBD solution for Marelli 11GF Version 6.21.0.0 out now Flex vehicles list extends with new FCA Group Mild Hybrid 2020 cars, that will from now …

Work via OBD on the Delphi DCM7.1A and DCM7.1B control units that are equipped on some recent PSA group vehicles Thanks to the two new …

Enhance performance on Kawasaki Jetski Ultra 310LX-S MY 2022 with KESS3 A new protocol is now available for reprogramming the ECU of one of the …

Bench solutions for Melco ECUs New Flex 6.20.0.0 update The new Bench solution for Melco E6T ECUs with Mitsubishi Electrics processors is now available for the Japanese car manufacturer’s vehicles: you …

Reprogramming the Continental CPC4 ECUs installed on Freightliner-branded giants Thanks to this latest KESS3 upgrade, you expand your horizons in the heavy-duty field: operate in …

Work via OBD on PSA group vehicles with Bosch MED17.4.4 control unit Read and write quickly and effectively, some Citroën and Peugeot models equipped with the …

Marelli 9DF HW002 boot solution Welcome Flex version 6.19.0.0 Program in Bootloader mode the Marelli 9DF engine control units with hardware version HW002. Released a new software update of Flex (6.19.0.0) …

Remap Porsche 911 (992) GT3 equipped with Bosch MG1CS047 control unit Thanks to the latest development, now you can work with total reliability directly from …

New OBD protocol for Ford brand with Continental EMS2204, 2205 and 2211 ECU Work easily and efficiently with OBD connection on Ford B-Max, C-Max, Ecosport, …

Welcome datalogger for VAG group vehicles Released the Datalogger solution for VAG group cars. The latest software version of Flex (6.18.0.0) adds the function for over 40 …

World exclusive for KESS3: read, write and clone in BENCH mode the ECU’s equipped on the KTM/Husqvarna MY 2023 cross/enduro range. Three new protocols dedicated …

Flex in bench mode for ME17.3.0 and EDC17C69 Available immediately the Bench mode for reprogramming Bosch ME17.3.0 and EDC17C69 ECUs produced or updated starting from July 2020 and equipped …

Remap with KESS3 Ducati Hypermotard, Scrambler and Supersport with Continental M4C ECU Choose to operate via OBD or BENCH mode and work on the latest …

Work via OBD on American cars equipped with Delco E67 control unit. Read and write ECU’s installed on Buick, Cadillac, Chevrolet, GMC, Pontiac and Saturn …

Read and write Mazda Skyactive-D with Denso SH9 ECU and Fiat Ducato 2.3 Multijet equipped with Magneti Marelli MJD 9DF HW002 ECU Four new protocols …

Work exclusively on the newest Suzuki’s equipped with the Denso RH850 Euro5 control unit. Two new motorbike protocols are available for KESS3: work on new …

Bosch MD1CC878 and Continental-Siemens HDEP MCM2.1 D4: work on Mercedes-Benz, Western Star, Class and Isuzu trucks with KESS3 Thanks to two new protocols dedicated to …

Work in BOOT mode on Continental EMS2302 installed on Ford Ka+ ! With KESS3 you can now read, write and clone Ka+ ECU from 2018. …

TCU Continental DQ500 and VGS-FDCT: reprogram in BENCH mode the new ECUs supported by KESS3 Enhance performance and driving pleasure safely by recalibrating a lot …

Reprogram in BOOT mode the Continental EMS2102 ECUs that equip Ford’s B-segment Thanks to the latest KESS3 upgrade, read and write in BOOT mode the …

Bosch TCU ZF6HP, Kefico TC60 and TC80, Temic MPS6: works in BENCH mode on the new control units supported by KESS3 Improve your performance and …

BMW R1250 GS: work in BENCH mode with KESS3, on the top selling motorbike of all time! Another protocol has been added to the list …

Work via OBD on DELPHI ETC3 control units equipped on the best trucks with PACCAR engines A new KESS3 upgrade: work safe and easily on …

Full Solutions for Renault Zoe Version 6.12.0.0 released Magicmotorsport continues to increase our commitment to electric vehicles with the latest release of Flex. Version 6.12.0.0 provides …

Remap with KESS3 the small Honda Brio equipped with Bosch ME17.9.55 TC1724 control unit After this upgrade, you can read and write in Bench mode …

Flex version 6.11.0.0 is ready New solutions for Transtron engine control units Released new protocol for OBD & Bench programming of Transtron’s ECUs installed on ISUZU vehicles. Flex SW 6.11.0.0 is …

Upgrade 1.15: Yamaha Ténéré 700 Another KESS3 update dedicated to the motorbike world! Now you can work via OBD on Denso ECUs (SH7058) for the …

26 July 2022 Works at 360° on Bosch EDC16C39 control units installed on Isuzu D-Max in BENCH mode Thanks to this new KESS3 update, you …

19 July 2022 Remap Mini Cooper S equipped with Bosch MEVD17.2.2. Do the best tuning ever, thanks to KESS3! Mini John Cooper Works GP, Cooper …

Reprogram in Bench Mode Bosch MD1 equipped on the new Isuzu Giga! Five new protocols to help you even more in your daily work. Thanks …

Reprogram new Peugeot 2008 in BOOT Mode with KESS3! Update dedicated to the PSA group, involving the top models of Citroën, Peugeot and Opel. Works …

Bosch MG1CS019 bench reprogram equipped on the new Ford F150 3.3 V6 New protocols to work via OBD and bench on three new ECUs equipped …

The update includes five new control units fitted on Aprilia, Kawasaki bikes and CF Moto ATVs. In particular:  Bosch MED17.8.10 Denso 21175-1594 Denso 21175-0053 Denso …

Bosch ME17.3.0 ECU equipped on new ABARTH E6d available for reprogramming on bench, thanks to KESS3. Work better and before anyone else with the new …

Use KESS3 to read, write and clone on bench and in boot mode four new gearbox control units. Work safely and effectively on hundreds of …

Only with KESS3! New Alfa Giulia and Stelvio 2.2 JTDm E6d in Bench Mode Reprogram and clone, without opening the control unit, the latest models …

UPGRADE 1.04 Latest updates and news on the Alientech worldWe dedicate this software update to the brand-new ZForce 1000 Sport just released on the market. …

UPGRADE 1.03 Latest updates and news on the Alientech world Four new Boot Mode and Service Mode protocols dedicated to two-wheelers to work on Kawasaki, …

Upgrade 1.0.2 Reprogramming in Service Mode on ECU Continental SID208 Ford and Bosch MEV1746 BMW; in Boot Mode on Kefico CPEGP2.10.1. Kia and Hyundai. Hundreds …

Read and write via OBD the engine control unit equipped on the new Honda Civic. UPGRADE 1.01This update allows you to work via OBD in …

From this update you’re be able to easily remove DTCs on a variety of petrol ECUs such as MED17.1, MED17.1.1, MED17.1.11, MED17.1.6, MED17.1.61, MED17.1.63 and MED17.1.65 which complements our …

Flex updates to 6.9.0.0 The compatibility list of Flex is enhanced by the drop of many Toyota’s latest generation vehicle.  The new firmware 6.9.0.0 made possible the programming of …

Alientech has recently launched the KESS3. KESS3 is the next in line after the Alientech KESSV2 and the K-tag tools. The new KESS3 is a …